OBAIR Air Handling Unit: Standardized installation operation guide (with video)

OBAIR Air Handling Units are widely used in clean air conditioning systems, commercial air conditioning systems, and industrial ventilation systems. Correct assembly is a crucial step to ensure that the units do not leak air, operate stably, and have a longer lifespan. To facilitate the use of on-site engineers, installation teams, and overseas projects, this article provides standard assembly steps + professional Chinese-English guide.

• Arrange each functional section

  Arrange each functional section of the unit according to the connection diagram.
• Remove the accessory box

  Remove the accessory box from the unit (usually located in the filter section or fan section).

  The accessory box contains: bolts, sponge, and structural adhesive.
• Attach sealing sponge

  Attach the sponge around the connection areas of each functional section to ensure a tight fit with the unit.
• Connect and tighten sections

  Use the bolts provided in the accessory box to connect the functional sections (base and top panels).

  Tighten the bolts with a wrench to prevent air leakage.
• Final inspection

  After connection, check for any omissions and ensure all bolts are properly tightened.
• Take out documents

  Open the electrical control box and remove the document bag.

  The bag contains: certificate of conformity, electrical schematic diagram, and key to the control box.